Male Chastity Accessories

Some rules should not bend for anyone, not even you. This time lock takes the decision out of your hands entirely, holding whatever it is attached to until the countdown says otherwise, whether that is a chastity device, a set of cuffs, a ball gag, or the cabinet key to your favorite toy.

Set the timer to whatever stretch of restraint you are after, short or long, then secure the bracket and let the lock take over. From that point there is no bargaining with it. You will feel the pull of the countdown as time ticks by, the anticipation building with every glance at the display, and there is no shortcut back to freedom except waiting it out. When your time is finally up, an audible tone sounds to let you know the lock has released, so you are never left guessing.

Built by XR Brands with a smooth ABS and metal bracket in black, this chastity time lock is USB rechargeable and works with a simple button interface, so it is worth giving it a full charge and checking it is secure before you commit to a session. Once this time-lock device engages, it holds firm until the clock runs out.

Trust is easy to promise and hard to prove, unless the proof is snapped right onto the cage. This pack of numbered plastic chastity locks lets a keyholder confirm at a glance whether their plaything has been playing by the rules.

Setting one up is as simple as sliding the end into the slot, just like a zip tie clicking into place, and it resists any tug or twist meant to loosen it. Once it is on, it stays on. Each lock carries its own serial number, so even a clever swap-out gets caught the moment the numbers do not match. There is no fumbling with keys or worrying about a lost one, since the plastic build means removal is possible in a pinch, but never without leaving proof behind. That built-in tension is part of the appeal: the lock quietly dares them to leave it alone.

Because they are plastic rather than metal, these locks slide onto polycarbonate or plastic cages without setting off metal detectors, and their light, water safe build means they can stay on through a shower without a second thought. XR Brands built this numbered lock set to turn a simple restraint into an ongoing game of trust, checked with nothing more than a glance at the number.

In smooth black plastic, this set of chastity locks is waterproof and made for single use, so once it is tampered with, everyone knows.

Add some style to your bondage gear with the Chrome Lock, an XR Brands staple that gives a sleek finish to any accessory, from collars and cuffs to chastity devices.

The smooth silver surface gives it a clean, polished look that suits any gear you pair it with. Each lock comes with a pair of keys, so you always know who is holding the way out. These locks are keyed alike, so you can use several lock and key sets together and open them all with the same set.

Simple to use and built to last, it is an easy way to add a finished look to your setup.

Some rules are enforced by a keyholder. These are enforced by a number. This pack of single-use plastic locks by CB-X gives you an easy way to keep a chastity cage sealed and honest, with each lock stamped with its own serial number so there is never a question of which one belongs where.

Fitting one is as simple as closing a zip tie, a quick snap and it is done, no key required to lock up. From there it stays put, quiet against the cage and light enough to forget about until you go looking for it. Because it is plastic rather than metal, it will not set off a metal detector, so travel or a day out is not a problem.

The only way off is with scissors, and any attempt to force it open destroys the lock, so a broken seal or a mismatched serial number tells the keyholder everything they need to know. That built-in tamper-evident design turns a simple plastic lock into a real test of trust, since the wearer technically could cut it off and swap it, but matching the number back up again is another story.

Keep a few spares on hand so a fresh chastity lock is always ready when the old one comes off.

Losing track of tiny hardware is the worst part of assembling a chastity device, so this piece solves that problem before it starts. This is a replacement black base part with fixed black guide pins, made for use with CB-X chastity devices, and it only works properly when paired with a matching companion base part.

Getting it into place is simple. The flat base sits down first, and its fixed guide pins line up the rest of the device so the cage stays properly seated. Because those pins are built in rather than loose, there is nothing extra to keep track of while you put things together.

Finished in black to match your CB-X setup, this base is designed to work alongside its companion piece, giving you a reliable replacement part without any guesswork.

Sometimes the smallest piece is the one holding everything together, and this replacement Base #2 for CB-X chastity devices proves the point.

This part comes in black and does not include guide pins. To properly set up a CB-X cock cage, this Base #2 needs to be paired with a Base part. Together, the two base pieces form the complete ring that works with the u-ring, which is what lets the cage kit come together as it should.

If this piece has gone missing from your setup, this replacement fills the gap so you can finish the ring assembly and get your device fully back together.

Keep it on hand with its matching Base part so your CB-X cage is always ready when you need it.

Getting the fit right is the whole game with chastity gear, and these spacers are how you dial it in. This is a replacement four-pack of black spacers made for CB-X chastity devices, giving you one of each size offered so you can fine-tune exactly how your cock cage sits.

Once you have your device and locking pins ready, the spacer is what sets the gap between the base of the device and the base of the cage, right where your scrotum hangs. Swap between the four sizes to find the one that feels right for your body, since the correct pairing of spacer and locking pin is what makes the difference between a cage that sits securely and one that does not. Too little space and things feel restricted, too much and the device can shift or slide, so having the full range on hand means you are not stuck guessing.

Made in black to match your CB-X device, this spacer four-pack is meant to be used with the corresponding CB-X locking pins for a properly fitted chastity experience.

Getting the fit right starts with the ring, not the cage. This U-Ring is a replacement piece for CB-X chastity devices, made to help you dial in the base fit without swapping out the whole setup.

A comfortable cage comes down to finding the cage ring that sits right against your body. This one fits into the base the same way the original piece did, giving you another sizing option if your current ring is not quite it.

Finished in black, this replacement ring works with any CB-X model or spare part in the lineup, so it is easy to match to what you already have.

Staying locked up is the whole point, so this shield is built to make sure you actually stay put. It works alongside your cage as an anti-pullout layer, adding a second line of defense to your male chastity setup rather than replacing it.

Fit it in with the cage as usual and you will notice the textured silicone surface first, a grip Sexy Fun World calls Shark Tooth Technology, which simply means the shield resists being pulled back off once it is seated. The texture adds a bit of stimulation against the skin while it works quietly in the background to keep the cage from slipping. It is compatible with the CB-6000 and many other popular plastic chastity cages, so if you already own one of those, this shield slots into your existing chastity routine instead of asking you to start over.

Made from textured silicone for extra sensation and grip, this security shield is a straightforward add-on to your setup. Just remember to skip silicone-based lube while using it.

A good cage is only as good as its ring. This U-Ring is a replacement piece for CB-X chastity devices, giving you a fresh fit option without needing to replace the whole cage.

Fitting it is simple: swap out the worn or wrong-size ring for this one, attach it to your existing device, and get back to a comfortable, secure setup. Because it works across CB-X models and spare parts, it slots in without any guesswork or special tools, so you can get the cage sitting the way it should and move on with your day.

Made in black, this U-Ring comes in sizing options to help you dial in the right fit for your CB-X cock cage.

Getting the base ring right is what makes a chastity device actually work day to day, and this two pack gives you the options to get there. Instead of guessing at a single size, you get a large and an XL U-ring, so you can find the one that sits right and keep the other on hand for whenever your fit needs change.

Swapping in a new U-ring is the easy part, it is choosing the right one that matters. Try the large first, and if it feels off, the XL is right there as a backup, no need to order again or wait for a replacement part to show up. Both are built to work with the full CB-X lineup, so whichever device you already own, these rings drop in as intended spare parts rather than a workaround.

This cock cage U-ring two pack comes in black and fits all CB-X chastity device models, so you always have the right ring on hand.

Every cage needs the right ring behind it, and this U-Ring is the piece that makes the fit work. It is a replacement part for CB-X chastity devices, handy when you need a different size or just want a fresh one on hand.

Fitting it is simple. Slide it into place behind the base the same way the original ring sat, and it connects with the rest of your setup just as it should. Because it is built to spec, it pairs cleanly with any cage or spare part you already own, so there is no guesswork about whether it belongs with your device.

Finished in black, this U-Ring is a core option in the lineup, made to work across the full range of cages and accessories. Keep one in reserve and you will always have the right fit ready when you need it.

Getting the fit right is what makes a chastity device work, and these locking pins are how you dial it in. This pack gives you a full set of replacement pins for CB-X chastity devices, so you always have the right size on hand when your setup needs adjusting.

Each pin pairs with its matching CB-X spacer to set the gap between the base ring and the cock cage, right where your scrotum sits. Getting that gap correct matters: too snug and things feel restricted, too loose and the cage can shift or slip off. With one of each size in the pack, you can test and swap until you land on the pin and spacer combination that holds your cage exactly where it should be.

In black, this pack covers every locking pin size offered in the complete CB-X kit, so you can fine-tune your cock cage fit whenever your body or device needs it.

A small part, a big difference. This replacement U-ring keeps your CB-X chastity device fitted the way it should be, so one worn or misplaced piece never sidelines the whole setup.

Fitting one in is simple. Slide it into place on your cage and it locks the rest of the system together just like the original ring did, holding everything secure and ready to go. Since it comes as its own option within the lineup, you can match it to the fit you already know works, without replacing parts you don't need.

Finished in black, this cock cage u-ring is made to pair with the full range of CB-X models and accessories, so keeping a spare on hand means you are always ready.

Sometimes all you need is the right connector, not a whole new setup. This U-Ring #3 is a replacement part for CB-X chastity devices, letting you keep your existing cage in service instead of replacing the whole thing.

Fitting works the same way it always has with a CB-X system: the U-ring links into your cage and spare parts to complete the closure, so swapping in a fresh one is straightforward once you know your size. Since it is built to CB-X's own spec, it slots in alongside your current setup without any guesswork about matching parts.

In black, this cock cage U-ring is sized to CB-X's #3 diameter and works with all CB-X models and spare parts.

A small part that makes a big difference. This is a replacement U-Ring for CB-X chastity devices, giving you a fresh fit option without needing a whole new setup.

Fitting a chastity cage properly starts with the ring, and having the right one on hand means you can swap in a replacement whenever you need it. This U-Ring slots into place the same way your original did, so setup is familiar rather than fiddly, and you can get back to a secure, comfortable fit with minimal fuss.

Finished in black, this cock cage U-Ring is sized to match its number in the lineup and works across all CB-X models and spare parts, so it is easy to find the right ring size for your setup.